#Cnc joint design software#

If the dowel holes are longer than the part, the software ignores them so parts donвЂ™t get doweled by mistake. You can set up a line bore pattern for them or set up custom distances that will fit any dowel machine. Bits are indexable so you replace only the blades, not the entire bitДoweling can be set up in the Exporter to fit any butt-jointed parts.Works only with the Vortex Half Blind Dovetail Tooling kit #7600.Dovetail ANY size drawer box using half-blind dovetail.No longer needing to measure your dovetail drawers in certain increments to make sure that a dovetail gets cut off, our software can dovetail any size drawer box. Sizes for the stop dados and mortise and tenon joints can be a custom sizeДovetail drawers couldnвЂ™t be easier in the Exporter.

Stop dados allow for easy edge banding of parts.

Mortise and Tenon Joints make cabinets impossible to be put together backwards.

Simply specify the thickness of the tenon and the mortise will adjust accordingly. The back side stop dado is needed to create a Mortise and Tenon (Qualified Tenon) Joint. This is where you specify the distance from the front and/or back of a part (bottoms, tops, fixed shelves, and spreaders/stretchers) so when the parts get edge banded, the Edge Bander can smoothly work without bouncing off of an already cut dado, causing damage to the part, or your machine. Stop Dados/Mortise and Tenon (Qualified Tenon) JointsД¬ombining 2 concepts together, any cabinet can be made handed (only able to be put together one way).

Cuts a notch instead of a dado and lengthens stretchers to fit into the new notch.

Warns but doesnвЂ™t error out so you can make the cuts manually at a later time.

Shorten the part that fits into the dado on the back that isnвЂ™t cut and allows pilot holes on the front side dado to screw that part in.

#Cnc joint design how to#

Since your machine can only cut from one side when cutting partitions that have dados on both sides, the Exporter offers solutions as to how to handle those cuts. Cuts are able to be made all of the way through when micвЂ™d so any after cutting and sanding is not needed to get the parts out.Parts fit better when materials are measured by micrometer.05вЂі +/- to allow for swelling and contracting of the material types due to moisture in the air, time of year, etc. The Exporter has a feature in it for adjusting the real material thickness of the materials by up to.

Information is stored so it doesnвЂ™t have to be entered again after the first time.

Set Number of passes per cut type (very useful for single bit machines).

Individually set tooling for material by material, or all materials using that tool.

Change the Feed Rate and the spindle speed per material and youвЂ™ll cut down on how fast a bit can carve through the material, saving you bit wear/tear, and eliminating chip-out to give you a smooth cutting part. Using the Exporter you can set up the same bit to go through different material types with varying thicknesses with ease.

#Cnc joint design code#

Keeping with the tradition of user-friendliness, now cabinets drawn in Cabinet SolutionsВ can be exported to our CNC Exporter where you can set up dadoes, and hole patterns with just a few clicks of the mouse.ДЇrom there you can export code to your machine for a complete nested CNC cabinet software package! Cabinet Solutions CNC is an easy-to-use screen-to-machine CNC software package forВ custom cabinet makers that works with almost any modern CNC router.